TEGG Service®…Why we Do It.

TEGG Service® is a series of field proven testing technologies, delivered through an advanced preventative maintenance programme, reported through a unique asset management system. A TEGG Service® programme is designed to fix your electrical maintenance and repair costs for up to 5-years.

Over 220 companies world wide now provide TEGG Service® and it has established itself as the leader in energised electrical testing and electrical preventative maintenance.

Alard having been at the forefront of electrical system design, installation and testing since 1984 have been sensitive to client’s feedback that traditional testing methods provide little value to modern dynamic businesses. Difficulty in shutting down office sections or production areas to allow fixed wire/insulation testing to take place, usually results in out of hours or weekend working that only serves to increase costs without adding real value.

The reality is that many businesses have areas where Periodic Testing limitations are recorded and never undergo the testing they require to conform to BS7671.

Alard have been concerned that there is no specific requirement to test electrical switchgear and distribution boards and the increasing pressure from Insurance companies on businesses to carry out meaningful testing and their concerns that BS7671 was being met (Increase in electrical fires – 4,000 in 2007) made us look worldwide for a solution to this problem.

Alard are proud to have been a TEGG Service® provider since 2005. TEGG Service® planned maintenance and energised testing programme incorporates Health & Safety standards to NFPA70E and assists companies in reducing their carbon footprint and utility costs – all aspects under the spotlight running a business today.

“The Value Of Electrical Preventative Maintenance.”

As we have already mentioned, TEGG Service® takes existing, proven technology and enables our highly trained technicians to both “hear” and “see” what’s going on in your facility.

This is carried out whilst your electrical distribution system is under normal working conditions, giving you a clear picture of what’s going right and more importantly what’s going wrong, enabling us to fix it before it becomes a real business interruption problem.

Without a TEGG Service® Preventative Maintenance Programme in place, the electrical distribution systems can waste from £600 to £2,300 per year in electric utility costs alone, through improperly torque connections and bad contacts that cause increased amperage draw and power loss as well as heating and arching.

Studies show that for every £1 spent on preventative maintenance you save £4 in re-active repairs, with a 25% return on investment TEGG Service® has got to be taken seriously, especially as you can fix this cost for up to 5-years and be guaranteed no nasty financial surprises…if we’ve tested it and it fails TEGG Service® pick’s up the bill.

“Here’s What Makes TEGG Service® so Unique”...

These are the tests we can carry out to enable us to fix your electrical costs and give you complete peace of mind for less than you currently pay for electrical maintenance and emergency repairs.

You will get:

  • A 3-Year Parts and Labour Guarantee For All Tested Components
  • Thermographic Imaging
  • Ultrasonic Testing
  • Power Quality Analysis
  • Visual Inspection
  • Predictive and Proactive Service.
  • Full Earth Continuity & Prospective Short Circuit Current Readings
  • Statutory Test and Inspection
  • FREE Asset Management Software
  • Full Reporting & Certification

Please take time a look at the TEGG Service® section of our website to see how we put all the above into action and why so many businesses now use TEGG Service® to take the hassle out of electrical testing and compliance.

 
Registered Office: Alard Electrical Limited, Unit 7, Cromwell Road, Bredbury, Stockport SK6 2RF
Registered in England and Wales - Registration Number: 1792384      Tel: 0161 406 6600   Email: Contact Us
JTL Investor in People ECA Constructionline ISO