TEGG Service® DE-ENERGISED SERVICE AND INSPECTION
These services are performed at a mutually agreed schedule, while the Owner’s electrical distribution system and/or electrical component(s) is de-energised and include, as appropriate, the following:
Insulation Resistance:
Measure and record the resistance of insulation under specified conditions set forth by applicable standards such as BS7671. This "fixed wire testing" service is designed to assure that the Owner’s electrical system and components’ insulation values are at an acceptable level, reducing the risk of explosions, fires and catastrophic breakdowns.
Winding Resistance Service:
Measure, record and compare the winding resistance of components. This service will assure that components are operating to applicable specifications, extending useful life, and reducing the risk of catastrophic failure.
Contact Resistance Service:
Measure and record the resistance between contact surfaces. This service addresses poor contact surfaces that would cause increased voltage drop, increased heat and reduced life expectancy, causing brown-outs, black-outs, explosions, fires and catastrophic failures.
Circuit Breaker Testing (Low Voltage):
Measure, test, record and document findings regarding all applicable low voltage circuit breakers. The proper testing and inspection of the Owner’s circuit breakers will reduce the risk of business interruption, fire and catastrophic failure.
Ground Resistance Testing:
Measure and record the resistance of conductors, connections and devices. This service will reduce the risk of power quality, harmonic and safety issues.
Transformer Service:
Measure, record and monitor all appropriate services and inspection to applicable standards such as NFPA Standard 70B. This service and inspection is performed to reduce the risk of transformer failure, which could result in fire, and/or catastrophic failure.
Motor Service:
Measure, record and monitor all appropriate services and inspection to applicable standards such as NFPA Standard 70B. This service and inspection is performed to monitor and trend the motor and to reduce the risk of failure.
Visual and Mechanical Inspection:
Interior and exterior of all components will be inspected to ascertain and, if necessary, make certain adjustments to ensure that its performance remains within specified limits. We will also identify corrosion, rust and discoloration, leaks, safety hazards, applicable electric code violations, grounding, physical damage and the general condition of components.
